McXtrace - An X-ray ray-trace simulation package

[ Identification | Description | Input parameters | Links ]

The Union_master Component

The Master Union assembles specifications (e.g. processes, materials, geometries).

Identification

• Site:
• Author: Mads Bertelsen and Erik B Knudsen
• Origin: ESS DMSC & DTU Physics
• Date: 20.08.15

Description

Part of the Union components, a set of components that work together and thus
sperates geometry and physics within McXtrace.
The use of this component requires other components to be used.

1) One specifies a number of processes using process components
2) These are gathered into material definitions using Union_make_material
3) Geometries are placed using Union_box/cylinder/sphere, assigned a material
4) This master component placed after all of the above

Only in step 4 will any simulation happen, and per default all geometries
defined before this master, but after the previous will be simulated here.

There is a dedicated manual available for the Union_components

Algorithm:
Described elsewhere

Input parameters

Parameters in boldface are required; the others are optional.

Name	Unit	Description	Default
allow_inside_start		Set to 1 if rays are expected to start inside a volume in this master	0
history_limit		Limits how many histories are recorded before stopping	300000
enable_conditionals			1
inherit_number_of_scattering_events			0

AT (	,	,		) RELATIVE		Generate
ROTATED (	,	,		) RELATIVE

Links

• Source code for Union_master.comp.

---

[ Identification | Description | Input parameters | Links ]

Generated on 2025-03-31 19:18:19

---

Last Modified: Tuesday, 29-Apr-2025 16:44:02 CEST