[ Identification | Description | Input parameters | Links ]
Compton_xrl_process
ComponentThis Union_process is based on the Incoherent.comp component originally written by Kim Lefmann and Kristian Nielsen Part of the Union components, a set of components that work together and thus sperates geometry and physics within McXtrace. The use of this component requires other components to be used. 1) One specifies a number of processes using process components like this one 2) These are gathered into material definitions using Union_make_material 3) Geometries are placed using Union_box / Union_cylinder, assigned a material 4) A Union_master component placed after all of the above Only in step 4 will any simulation happen, and per default all geometries defined before the master, but after the previous will be simulated here. There is a dedicated manual available for the Union_components Algorithm: Described elsewhere
Name | Unit | Description | Default | |
density | g/cm^3 | Nominal density of material. | 0 | |
atomno | 14 | |||
element | str | The element (symbol) of the material. Overrides Z. | "" |
AT ( | , | , | ) RELATIVE | |||
---|---|---|---|---|---|---|
ROTATED ( | , | , | ) RELATIVE |
Compton_xrl_process.comp
.
[ Identification | Description | Input parameters | Links ]
Generated on 2025-03-31 19:18:19