About McXtrace
Publications
Project Partners
Project People
Goal
Documentation
Manual
Commands
Wiki (GitHub)
Tutorial
[ Identification | Description | Input parameters | Links ]
The Slit_N Component
Rectangular/circular slit
Identification
- Site:
- Author: Erik Knudsen
- Origin: Risoe
- Date: June 16, 2009
Description
Based on Slit-comp by Kim Lefmann and Henrik Roennow A simple rectangular or circular slit. You may either specify the radius (circular shape), which takes precedence, or the rectangular bounds. No transmission around the slit is allowed. If cutting option is used, low-weight x-rays are ABSORBED Example: Slit(xmin=-0.01, xmax=0.01, ymin=-0.01, ymax=0.01) Slit(radius=0.01, cut=1e-10)
Input parameters
Parameters in boldface are required; the others are optional.| Name | Unit | Description | Default | |
| radius | Radius of slit in the z=0 plane, centered at Origo (m) | 0 | ||
| cut | Lower limit for allowed weight (1) | 0 | ||
| xwidth | Width of slit. Overrides xmin,xmax. (m) | 0 | ||
| yheight | Height of slit. Overrides ymin,ymax. (m) | 0 | ||
| N | number of slit openings (1) | 2 | ||
| d | separation of slits (m) | 0 |
| AT ( | , | , | ) RELATIVE | |||
|---|---|---|---|---|---|---|
| ROTATED ( | , | , | ) RELATIVE |
Links
- Source code for
Slit_N.comp.
[ Identification | Description | Input parameters | Links ]
Generated on 2025-03-31 19:18:19
